Exam
Exam 3
Covers weeks 8–11. From the info sheet.
What it covers
- Bode plots: draw the asymptotic magnitude plot of a given H(f), mark corner frequencies as poles or zeros, compute dB levels in each region, then sketch the actual curve and label the 3 dB differences at the corners (week 8 material; on every recent Exam 3)
- System block diagrams: reduce a feedback loop with cascaded blocks to a closed-loop H(s) with a polynomial denominator, find the gain that makes it critically damped, say whether a larger gain makes it under- or overdamped, and find any zero
- Second-order transients: characteristic equation, its roots and the damping type, final conditions (C open, L short), initial conditions before and just after a switch moves, and initial slopes diL/dt(0) = vL(0)/L and dvC/dt(0) = iC(0)/C
- Complete second-order responses: write X(t) with constants B and D for the overdamped, critically damped or underdamped case
- Diodes in DC circuits: with given assumed states for each diode (silicon 0.7 V, LED 2 V, zener VZ), compute the requested voltages and currents, then check each assumption with a value and its allowed range
- Diodes with AC inputs: output waveforms for triangle or sawtooth inputs, and zener and LED circuits
- Lab material from the transients, servo and diodes labs (the syllabus says exams also cover the labs)
Format and rules
- 50-minute midterm, worth part of the 300 midterm points (three midterms in all)
- Closed book and closed notes; no phones, tablets or computers
- Calculators allowed
- The cover page gives a Useful Information sheet (Exam3_Info.pdf): Bode plot rules, the three second-order canned solutions with formulas for B and D, the initial-slope formulas, final-condition rules, block diagram and feedback-loop formulas, and the diode, LED and zener models
- Show all work to receive credit; circle answers, show units, and round off reasonably
- Use constant-voltage-drop models for diodes and LEDs
- The class may be split into two or more rooms on exam day
Advice
- Learn concepts and relationships, not formulas or specific problems; the exams test whether you can use them in new ways
- If you thoroughly understand the homework, the exams should give you no trouble
- On diode problems the exam usually tells you which states to assume; stick with those assumptions even if the answers come out absurd, then show a specific value and range to judge each one
- Work past exams: the folder has Exam 3 from Fall 2000 through Spring 2022, with answers on the last page of the recent ones
- If you do poorly, see the instructor before the next exam; there may be a chance to improve your score
- Transistor switches (week 12): in Fall 2023 Exam 3 came before the transistor lecture, and recent Exam 3s have no transistor problems; expect them on the final
Past exams
| Year | Fall | Spring |
|---|---|---|
| 2022 | exam | |
| 2021 | exam | exam |
| 2020 | exam | exam |
| 2019 | exam | exam |
| 2018 | exam | exam, long version |
| 2017 | exam | exam |
| 2016 | exam, long version | exam, long version |
| 2015 | exam | exam |
| 2014 | exam | exam |
| 2013 | exam | exam |
| 2012 | exam | exam |
| 2011 | exam | exam |
| 2010 | exam | exam |
| 2009 | exam | exam |
| 2008 | exam | exam |
| 2007 | exam | exam |
| 2006 | exam | exam |
| 2005 | exam | exam |
| 2004 | exam | exam |
| 2003 | exam | exam |
| 2002 | exam | exam |
| 2001 | exam | exam |
| 2000 | exam | exam |