Exam

Final

Covers the whole course. From the info sheet.

What it covers

  • Cumulative over the whole course, with more weight on the most recent material (op amps, AC power, transformers)
  • Thévenin equivalents and DC network analysis
  • Capacitors and inductors: i–v relations, series and parallel combinations, stored energy, continuity of capacitor voltage and inductor current
  • First-order transients: x(t) = x(∞) + (x(0) − x(∞))e^(−t/τ) with τ = RTh × C or L/RTh
  • Steady-state sinusoidal AC: impedances ZC and ZL, phasor currents and voltages in polar form, which current leads or lags, and what parts would build a given impedance
  • Resonance, ω0 = 1/√(LC)
  • Transfer functions H(s) from Laplace impedances, counting poles and zeros, and Bode plot slopes of −20, 0 and +20 dB/decade
  • Second-order transients: overdamped, critically damped and underdamped solutions with initial and final conditions
  • System block diagrams and the feedback-loop transfer function A/(1 − AB)
  • Diodes, LEDs and zeners: on/off models and output waveforms of diode and zener circuits
  • BJT switches (NPN and PNP): cutoff, active and saturation, β needed for saturation, transistor power, and flyback diodes on inductive loads
  • Op-amp circuits: noninverting, inverting, summer, differentiator, integrator, instrumentation amplifier on a strain-gauge bridge, comparators, Schmitt trigger and oscillator, including output waveform sketches with rail clipping
  • AC power: RMS, P, Q, S, |S|, power factor, leading or lagging, power phasor diagrams and power-factor correction with a parallel capacitor
  • Ideal transformers: voltage and current ratios, reflected impedance, and checking operation against V and VA ratings

Format and rules

  • 2 hours (Fall 2023: Friday 12/15, 8:00 to 10:00 am), 180 points, 26.25% of the course grade
  • Closed book and closed notes; no phones, tablets or computers
  • The only reference allowed is the two-page Final Exam Useful Information sheet (Final_Info.pdf); bring it, and you may add whatever you want to it
  • Show your work for credit; past finals give partial credit only for shown steps and intermediate answers

Advice

  • Learn concepts and relationships rather than memorizing formulas and specific problems; exams test whether you can apply them in new ways
  • Exams also cover what you learn in the labs
  • Attend the review session before the final (Zoom in Fall 2023)
  • On waveform sketches, clearly label peak voltages and switching times; past finals warn that unclear values are marked as not known
  • Give correct units and signs on every power answer (W, VAR, VA, negative Q for capacitors)
  • Work the past finals in this folder (Fall 2000 to Spring 2022) to see the instructor's problem styles

Past exams

YearFallSpring
2022exam
2021examexam
2020examexam
2019examexam
2018examexam
2017examexam
2016examexam
2015examexam
2014examexam
2013examexam
2012examexam
2011examexam
2010examexam
2009examexam
2008examexam
2007examexam
2006examexam
2005examexam
2004examexam
2003examexam
2002examexam
2001examexam
2000examexam